Tsunami Cartridge Bilge Pumps

Attwood

SKU

Tsunami cartridge bilge pumps deliver powerful water output in 500 gph, 800 gph and 1200 gph capacities. They circulate water around the pump motor housing, helping to absorb the heat given off by the operating motor. The patented shaft seal centres directly on the motor shaft, preventing leaks caused by misalignment. The moulded two-wire seal is permanently fused to the insulation to prevent a leak path. Wiring is caulked and tinned to eliminate wicking, prevent water damage and resist corrosion.
Secured directly to the hull - no bracket required. All pump housings are made of rugged glass and mineral-filled polymer that withstands hull pounding and resists chemicals. Not just fuel, oil and detergents that accumulate in the bilge, but also the plasticizers used in most hoses. These plasticizers can break down the chemical composition of the materials used in other pumps.

3-Year Warranty

As low as £20.59

Where to buy

Model

Voltage

Packaging

Details

Dimensions

Model No	A	B	C	D (Hose Size)	E	Wire/Connector
500 GPH	2-3/4”	2-7/8”	3-5/8”	3/4” O.D.	3-1/8”	29” Wire
800 GPH	3-1/8”	3-1/4”	4-3/8”	3/4” O.D.	3-1/22	29” Wire
1200 GPH	3-1/8”	3-1/4”	4-3/8”	1-1/8” O.D.	3-3/4”	29” Wire

Specifications

GPH Output @ Design Voltage 13.6 VDC
Model No	Rated Voltage	Amp Draw	0 ft	3.3 ft	6.7 ft	Max Head	Fuse Size
500 GPH	12	1.8	500	400	250	9 ft	3-amp
800 GPH	12	3	800	660	510	13 ft	4-amp
800 GPH	24	1.3	800	660	510	13 ft	2-amp
1200 GPH	12	3.5	1200	900	700	11 ft	5-amp

GPH Output @ Nominal Voltage 12.0 VDC
Model No	Rated Voltage	Amp Draw	0 ft	3.3 ft	6.7 ft	Max Head	Fuse Size
500 GPH	12	1.4	450	320	160	8 ft	3-amp
800 GPH	12	2.5	760	550	400	11 ft	4-amp
800 GPH	24	1.1	760	550	400	11 ft	2-amp
1200 GPH	12	3	1100	760	480	9 ft	5-amp