The centre female thread is shorter and designed for use with Aquavalve Tails (Straight, 90°, and 120°) giving the option of tail sizes from 19mm up to 38mm. The Plug, or Threaded Connector can also be used in the centre connection.

• NOTE: all Aquavalve Tails that are used with the T-Piece do not face-seal using the Red or Blue washer as they do when used in Aquavalves. Instead, use a suitable thread sealant or PTFE tape to seal threads. The 1½" Male and Female threads at each end are also parallel and are designed to seal through the use of a suitable sealant or PTFE tape allowing any orientation of the two joined parts. Do not over tighten!
• Chemical Resistant - Unaffected by diesel, petrol, house-hold chemicals, and antifouling paints.
• Quality Finish - High quality surface finish, will not discolour with green film as similar bronze fittings do.
• Corrosion Free - Long life with no decreased performance due to corrosion or electrolysis.
• Strong and Lightweight - Manufactured from a glass reinforced nylon composite - High strength without the weight.
• Large Operating Range - Suitable for all marine conditions from - 40°C to +110°C.
• UV Resistant - Will not degrade or discolour from the sun’s ultraviolet rays.