PVC (3026) 2 Part Adhesive - 250ml Tin &10ml cure


Glue, a PVC Inflatable Boat Adhesive.

PLEASE NOTE:- A complete bond 2903 solvent must be used before applying the adhesive.

  • Solvent-based polyurethane adhesive gives excellent adhesion to both plasticised and unplasticised PVC
  • Used in conjunction with an A3695B curing agent will bond a wide variety of surfaces including PVC, nylon fabric, polyurethane fabric and foam
  • Use for repair of all PVC inflatables including Zodiac/Bombard "Dynalon" and "Strongon" fabrics and Narwhal/Valiant "Hypertex"
  • Easy to mix two parts supplied in sets with the requisite amount of curing agent
  • Can be used as a single part for quick temporary repairs
  • Easy to apply by brush, roller or serrated trowel; contact bonds in 10-15 minutes, full cure within 48 hours
  • Shelf life - 24 months unopened tin; mixed adhesive has a pot life of 3-4 hours
  • Coverage. using 2 coats 1-litre bonds 1 square metre
  • Primer- Solvent 2903 is necessary as a primer before applying adhesive for maximum bond
  • Used by liferaft service stations and major manufacturers