Pump 1038 and by pass

A version with By-Pass connector allows the connection of both a hand pump and an electric centrifugal on a single water circuit.**Not suitable for a diaphragm or a flexible impeller electric pump.Output: 1 litre per cycleCapacity, as per ISO 15083 standard (45 strokes per minute, with a 10 kPA depression): 40,5 litres/minuteWeight: 1,050 kgHose diameter: Ø 38 mm (1 1/2")Supplied with : 2 elbow fittings with valve (inlet & outlet)

• The Plastimo pump is very compact and the 90° position of the outlets allows installation where space is limited or access difficult.
• Outlets swivel through 360° and therefore adapt perfectly to the pump position in relation to the strainer and thru-hull fitting.

Optimum safety

• No hassle looking for the handle at the critical moment : the Plastimo bilge pump is always ready-to-pump, thanks to its fully integrated handle.
• In case the diaphragm would leak, the water is rejected in the cockpit (not in the bilge), so you can't help noticing it immediately.

Simple installation and maintenance

• Installing the pump is extremely simple : all done from the cockpit.
• The diaphragm can be removed within seconds.