NaviLED Compact Gen II Bi-Colour Deck Mount Navigation Light - White
Bi-Colour LED deck mount navigation light with a white finish and 2NM visibility for powerboat applications.
- 9-32V DC Multivolt operation for 12V and 24V systems
- IP67/IP69 sealed construction and UV-resistant acrylic lens
- Concealed two-hole mounting and 120mm tinned marine cable
- Five-year manufacturer warranty
- One lamp; manufacturer part 2LT 017 910-601
NaviLED Compact Gen II Bi-Colour Deck Mount Navigation Light
This Hella marine NaviLED Compact Gen II provides a combined red port and green starboard light with 2 nautical mile visibility in a compact horizontal deck mount design. Part number 2LT 017 910-601 is the white version and is supplied as one lamp. The range is designed for powerboats up to 20 metres overall length, subject to the vessel's navigation light requirements and correct installation.
Compact design with a clean installed finish
The redesigned Gen II housing uses a clear lens and an open-flow drainage design. Its two-hole screw mounting arrangement conceals the fasteners once installed, making it suitable for fitting on the bow where a neat, low-profile finish matters. The white shroud provides a clean finish that complements the surrounding deck fittings. This is a horizontal surface mount light; select the appropriate lamp function and mounting position for the vessel.
Reliable illumination on 12V and 24V systems
Multivolt electronics accept 9-32V DC, allowing operation on both 12V and 24V DC installations. The lamp maintains its specified minimum visibility down to 9V, helping preserve light output when the supply voltage falls. Reverse polarity protection is included. LED technology keeps consumption low, with 2.3W maximum.
Built for the marine environment
The high-impact, UV-resistant acrylic lens and completely sealed construction are designed for exposure to sunlight, salt air and vibration. IP67 and IP69 protection cover immersion in operation and high-pressure water jet cleaning. Components are designed to control electromagnetic emissions and susceptibility in accordance with the stated standards, helping limit interference with onboard radio, navigation and communication equipment.
Technical specifications
| Manufacturer | Hella marine |
|---|---|
| Manufacturer part number | 2LT 017 910-601 |
| Lamp function | Bi-Colour |
| Light output | Combined red port and green starboard light |
| Finish | White |
| Minimum visibility | 2 nautical miles (powerboat application) |
| Operating voltage | 9-32V DC; suitable for 12V / 24V DC systems |
| Power consumption | 2.3W maximum |
| Lens | High-impact, UV-resistant acrylic |
| Mounting | Horizontal surface; two-hole screw mount with concealed fasteners |
| Cable | 120mm tinned marine cable |
| Ingress protection | IP67 / IP69; completely sealed |
| Voltage protection | Reverse polarity protected |
| Warranty | Five-year manufacturer warranty |
| Pack contents | One navigation lamp |
Standards and installation
Hella lists the following approvals and standards for the Gen II range: IMO COLREG 72, USCG 33 CFR 183.810, ABYC C-5:2024, NMMA Type Accepted, ISO 19009:2015, EN60945:2002, RINA, CE, RCM and UKCA. Choose and install navigation lights to suit the vessel type, length, required sectors and applicable regulations. Follow the manufacturer instructions for alignment, mounting and electrical connection.
