This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

Hydraulic Steering Kit for Outboards up to 175 Hp

SKU
K175

From Glydus, this packaged hydraulic steering system is designed for outboards up to 175 Hp.

  • Standard Wheel Turns : 6.8 Lock to Lock
  • # Hose length can be customised as per customers' request.
  • # For higher or lower number of turns, contact our technical support team
     

The Standard Steering Kit K175 for Single Cylinder - Single Outboard includes:

  • Helm Pump 18 cc
  • Cylinder for Outboards up to 175 Hp
  • Hydraulic Steering Fluid
  • Hydraulic Hose 7.5m with factory crimped hose connectors 

 

Glydus K175: Single Engine Application Guide

Before selecting a cylinder from this application guide, please verify the model year of your outboard to ensure you are choosing the correct cylinder for your boat.

Note - Your splashwell should be wide enough for the installation of the cylinder. Check installation manual for space requirements.

*Note: Johnson 115 HP-2-Stroke outboards, required the tiller plate to be inverted

 

Manufacturer Year Model Cylinder Notes
Honda 1992-Date 30-50 HP 4-Stroke OC175 See note A
Honda 1996-Date 75-90 HP 4-Stroke OC175  
Honda 2015-Date 100 HP 4-Stroke OC175  
Honda 1998-2010 115-130 HP 4-Stroke NA  
Honda 2003-Date 135-175 HP 4-Stroke OC175  
Honda 2010-Date 115 HP 4-Stroke OC175  
Johnson / Evinrude* 1991-Date 40-175 HP Inc. E-Tec OC175 See note A
Johnson / Evinrude* 1997-Date 115 HP Ficht OC1751  
Johnson / Evinrude* 2017-Date 75-115 HP Ficht OC175 See note C
Johnson / Evinrude* 1998-Date 40-140 HP 4-Stroke OC1751 Requires Spacer Kit SP1, *Note A
Mercury / Mariner 1984-Date 75-115 HP OC175 See note C
Mercury / Mariner 1998-2007 40-60 HP 2-Stroke OC175N Requires Spacer Kit SP1, *Note A
Mercury / Mariner 2008-Date 40 HP 4-Stroke OC350N Requires Spacer Kit SP1
Mercury / Mariner 2008-Date 60 HP 4-Stroke OC175 See note A
Selva 2000-Date 25-70 HP 4-Stroke OC175N Requires Spacer Kit SP1, *Note A
Selva 2000-Date 90-175 HP 4-Stroke OC175 See note 5
Selva 2011-2013 115 HP 4-Stroke OC1751  
Suzuki 1986-Date 150 HP 2-Stroke OC175 See note C
Suzuki 1987-2002 115-140 HP 2-Stroke OC175 Requires Spacer Kit SP1
Suzuki 1990-2000 90-100 HP 2-Stroke OC175  
Suzuki 1998-Date 40-70 HP 4-Stroke OC175 Requires Spacer Kit SP1, *Note A
Suzuki 2001-Date 90-140 HP 4-Stroke OC1751 Requires Spacer Kit SP1
Tohatsu 1990-Date 40-140 HP 2-Stroke OC-175 See note A
Tohatsu 2014-Date 60-175 HP 4-Stroke OC-175  
Neander-Marine 2017-Date Dtorque 111-90 HP OC-175  
Yamaha 1998-Date 40-50 HP 2-Stroke OC-175 See note A
Yamaha 1998-Date 60 HP 2-Stroke OC-175 See note B
Yamaha 1986-Date 70-90 HP 2-Stroke OC-175 Requires Spacer Kit SP1
Yamaha 1997-Date 80-175 HP 4-Stroke OC-175 See note C
Yamaha 2000-Date 25-70 HP 4-Stroke OC-175N Requires Spacer Kit SP1, *Note A
Yamaha 2011-2014 90-115 HP Inc. A Series OC-1751  
Yamaha 2014-Date 90-115 HP Inc. B Series OC-175  

 

A - To avoid problems with outboard trim and tilt, the outboard clamp brackets must be cut or ground down and the outboard should be bolted directly to the transom.

B - Steering hook Yamaha Part# 63D-48511-11JL1J-4D must be installed

C - High performance 115HP outboards and any outboard using a 4-3/4" gear case such as a COMMAND THRUST must use Glydus 3511J HP Cylinder

File(s)