Clean, inspect and repair
The existing Silic One or Hempasil Pro must be in good condition, clean and dry. Carry out coating repairs within the preparation interval specified by Hempel.
Hempel Infinity. Give a sound Silic One coating a simpler seasonal refresh. Infinity is a water-based recharger designed to extend the performance of compatible Hempel silicone coatings for a further season.

For existing Silic One or Hempasil Pro in good condition.
No sanding, masking or repainting for the Infinity recharge process.
Allow the treatment to infuse, then hose off with fresh water.
Infinity is a maintenance treatment for the existing Hempel silicone surface. It is not a replacement for installing Silic One on a bare hull, and it does not repair missing or damaged coating. Start with inspection: a sound coating can follow the recharge route; damaged areas need the appropriate repair first.
The existing Silic One or Hempasil Pro must be in good condition, clean and dry. Carry out coating repairs within the preparation interval specified by Hempel.
Stir well and apply liberally with a brush or roller, ensuring coverage of the previous coating. Keep the surface at least 3°C above the dew point.
Leave for at least 24 hours, or 48 hours below 10°C, then hose off with fresh water. Collect and dispose of residue as paint waste.
Use the current product data, safety data and substrate-specific application instructions supplied by Hempel. Temperature, humidity and film thickness affect the working and overcoating schedule.
Enter the measured coated area for an illustrative estimate. Reference coverage: 8.9 m²/L at 112µm wet film thickness.
Illustrative estimate only. Estimates Infinity recharge treatment only, not Silic One coating or repairs. Coverage varies with application and the existing surface. Actual use depends on surface profile, application and film build. Confirm quantities against the current Hempel specification and the supplied pack. Round purchasing quantities up to whole suitable packs; this tool does not add items to your basket.
Calculation: area × coats ÷ 8.9, then multiply by (1 + allowance ÷ 100). Litres are rounded up to the next 0.01L.
| Product type | Water-based silicone-coating recharger |
|---|---|
| Compatible coatings | Sound Hempel Silic One 77450 or Hempasil Pro 87850 |
| Listed size / shade | 2.4L / Transparent 00000 |
| Theoretical coverage | 8.9 m²/L |
| Reference wet film thickness | 112µm |
| Application | Brush or roller |
| Activation before rinsing | Minimum 24h; 48h below 10°C |
| Tool cleaning | Fresh water |
| Transport / storage | Keep above 5°C |
No. Repair the underlying coating first. Hempel specifies repairs at least 24 hours and no more than one month before Infinity application.
No. Hempel specifies Infinity only over Silic One or Hempasil Pro in good condition.
At 8.9 m²/L, 2.4L represents 21.36 m² of theoretical treatment coverage before allowance for practical losses. Use the calculator for an illustrative quantity.