✕
| Size (Cm) | XS | S | M | L | XL | XXL |
| Height | 155-160 | 160-165 | 170-175 | 180-185 | 185-190 | 190-195 |
| Chest | 82-86 | 87-91 | 97-101 | 107-111 | 112-116 | 117-121 |
| Waist | 66-70 | 71-75 | 81-90 | 91-95 | 96-100 | 101-105 |
Skin Fitting Domed Long 1" BSP Tagged
SKU
TRU91078
Designed and made in New Zealand, the Skin Fitting body and nut are moulded from a glass-reinforced nylon composite. High strength, high-modulus glass fibres provide dramatic strength, stiffness, toughness and dimensional stability.
£10.50
RRP
Ex. VAT
These properties allow a significant weight reduction over metallic fittings. TruDesign Skin Fittings eliminate the corrosion and electrical bonding problems associated with metallic fittings.
- Complies to ISO standard 9093:2021 by the International Marine Certification Institute and Type approved by Bureau VERITAS. Note: excludes ½” size
- Meets the ABYC H-27 500Lb static load test for sizes 1" through 3". Note: TruDesign ABYC Load Bearing Collar is required for 1" size to comply
- TruDesign accepts no responsibility for Ball Valves or Skin Fittings which are not installed as per manufacturers instructions
- Certified - Complies with ISO 9093:2021 and certified by IMCI International Marine Certification Institute.
- Large Operating Range - Suitable for all marine conditions from - 40°C to +110°C.
- Compatible - Works with many hull types - aluminium, steel, wood or GRP hulls.
- UV Resistant - Will not degrade or discolour from the sun’s ultraviolet rays.
- Chemical Resistant - Unaffected by diesel, petrol, house-hold chemicals, and antifouling paints.
- Paintable - High quality surface finish, will not discolor and can be painted with all types of antifouling.
