Edge Johnson®, Evinrude®, OMC® Control Cable

SKU

Special Edge Conduit

The unique design of Conduit provides structural integrity and a tighter minimum bend radius.

Improved Efficiency

Edge cables provide significantly greater efficiency due to the use of low-friction materials and construction.

Minimal Backlash

Edge cables are built allowing the optimum gap between the inner core and conduit, resulting in significantly minimal backlash.

Less Friction Wiper Seal

The wiper seals are made from polyurethane impregnated with lifetime lubricant to minimize operating friction.

Cable Bend Radius

Edge Cable has a minimum bend radius of 4 inches. However, in use keep the bend radius as large as possible and the degree of bend to a minimum for optimal performance.

The above features translate into improved efficiency with reduced operator effort when EDGE cables are used.

As low as £61.61

Details

Engine Control Cables EEC-014-XX (XX is the length of cable in feet) are used for Shift and Throttle application. Different designs of Engine Control Cables are used depending on the engine type and installation.
Multiflex offers a wide variety of Engine Control Cables for different applications. Engineered out of corrosion-resistant materials and components these control cables meet or exceed all industry standards.
Multiflex Engine Control Cables are interchangeable with the most common SeaStar Solutions®, Morse®, and Ultraflex® Engine Control Cables.

Refer to the Cross-reference Chart for interchangeability.

Applicable for BRP® – Evinrude® (OMC®) Engines manufactured post-1979.

Travel: 80 mm | EDGE Conduit: 8.6 mm | Inner: 2.7 mm (Coated Inner) Flexible core