Aquavalve Tail 25mm 1½” BSP

These fittings can be used on the Aquavalve, Aquavalve through Bulkhead, Electronic Aquavalve or 3 Way Connector. Straight Tails are suited to standard sizes of tubing. Tails come with a thicker Blue Seal to allow the fitting to be rotated to a more suitable position, if required.

• The use of 2 hose clamps is recommended for secure hose fitting
• Tru-Design Aquavalve Accessories use a 1½” BSP parallel thread for securing the fitting. This is matched to the same thread on the Aquavalve body. The thread is not used for sealing. A thermoplastic rubber seal provides the sealing function.
• The Aquavalve and accessories are suitable for use in the USA even though they are not NPS compatible. They form a self contained unit and are not required to interface with other components.
• Do not use other fittings as they may interfere with Aquavalve operation or sealing. Not recommended for use with Ball Valves – please select from our Tail Long Thread fittings
• Chemical Resistant - Unaffected by diesel, petrol, house-hold chemicals, and antifouling paints.
• Quality Finish - High quality surface finish, will not discolour with green film as similar bronze fittings do.
• Corrosion Free - Long life with no decreased performance due to corrosion or electrolysis.
• Strong and Lightweight - Manufactured from a glass reinforced nylon composite - High strength without the weight.
• Large Operating Range - Suitable for all marine conditions from - 40°C to +110°C.
• UV Resistant - Will not degrade or discolour from the sun’s ultraviolet rays.