Aquavalve Tail 120° 38mm 1 ½” BSP - includes Blue Seal - White

These fittings can be used on the Aquavalve, Aquavalve through Bulkhead, Electronic Aquavalve or 3 Way Connector. Angled Tails suited to the most common sizes of tubing used in marine plumbing. Tails come packaged with a Blue Seal to allow fitting to be rotated to a more suitable position if required.

• The use of 2 hose clamps is recommended for secure hose fitting.
• Tru-Design Aquavalve Accessories use a 1½” BSP parallel thread for securing the fitting. This is matched to the same thread on the Aquavalve body. The thread is not used for sealing. A thermoplastic rubber seal provides the sealing function.
• The Aquavalve and accessories are suitable for use in the USA even though they are not NPS compatible. They form a self contained unit and are not required to interface with other components.
• Do not use other fittings as they may interfere with Aquavalve operation or sealing. Not recommended for use with Ball Valves – please select from our Tail Long Thread 120° fittings.
• Chemical Resistant - Unaffected by diesel, petrol, house-hold chemicals, and antifouling paints.
• Strong and Lightweight - Manufactured from a glass reinforced nylon composite - High strength without the weight.
• Corrosion Free - Long life with no decreased performance due to corrosion or electrolysis.
• UV Resistant - Will not degrade or discolour from the sun’s ultraviolet rays.
• Quality Finish - High quality surface finish, will not discolour with green film as similar bronze fittings do.
• Large Operating Range - Suitable for all marine conditions from - 40°C to +110°C.