This product has been discontinued.

We have discontinued this product permanently. Please find alternative products from below section.

DISCONTINUED WITH NO REPLACEMENT (Spinlock 275N Deckvest Lifejacket Harness Hammar - Size 2)


DISCONTINUED WITH NO REPLACEMENT (Spinlock 275N Deckvest Lifejacket Harness Hammar - Size 2)


Spinlock 275N Deckvest Lifejacket Harness Hammar - Size 2. 

The complete lifejacket harness for all sailors,

High specification automatic inflating lifejacket harness

Very light, comfortable design for use over long periods

Compact and unobtrusive

Pylon Light– high intensity, water activated flashing LED Light. 23cm flexible antenna wand gives improved visibility above head & water

Deck safety harness with soft loop safety line attachment point

Double crotch straps / thigh straps with recessed clips

Sprayhood - to reduce the risk of secondary drowning

Quick access emergency safety line cutter

Mesh pocket for VHF/PLB Locator

Toggle attachment point for Chest Pack - DW-PCC

Now available in 3 colours: Black, Pacific Blue, Tropic White

Unique ‘Shoulder Fit System’ flexes and locates ensuring correct fit on shoulders every time

New back adjustment – hidden and non snag for easy, simple adjustment

Easily converts to ‘manual only’ firing head with a Manual conversion kit

Through Life Support (TLS) Registration extends product warranty to 5 years

RescueME / AIS MOB1 available to purchase as a stand-alone unit or supplied fitted integrated within a Deckvest

CO2 Cylinder - 60g

Weight - 1600g


The Deckvest 5D Pro Sensor is approved to the following international standards:

CE Approved

ISO 12402-3 Lifejacket (170N) ISO12402-2 (275N)

ISO 12401 Deck Harness

Through Life Support

Registering your Deckvest gives you the benefit of our unique online support, to help ensure that your lifejacket is reliably maintained.

Lifejacket warranty is extended to 5 years upon registration 

Prompts for winter care, storage and pre-season safety checks

Access to latest online support and advice

Updates on MOB prevention and advice 

The Deckvest 5D Pro Sensor uses the UML Pro Sensor inflator.

This is a water sensitive activation system, that uses a compress paper capsule which dissolves when wet, which then releases a spring to

pucture the CO2 cylinder.

The cap is designed so that only water flowing upwards through the unit will cause it to activate. Water, spray and rain running down the

jacket will not cause activation.

The Pro Sensor has two indicators that show the status of the CO2 cylinder and firing head.

Size Gudies

Size Guides

Flying with your Deckvest

Lifejacket inflation system explained

Deckware FAQ's

Service Centres

Deckvest 5D 275N instructions

Deckvest 5D Hammar instructions

Note: We recommend that the Deckvest is checked at least once a season, and before any long passages. We recommend that you have your Deckvest serviced by a service agent once every two years.